 
Here is the life-time contrast list of Boron Carbide nozzles and nozzles made from other general abrasives when they are used with 3 mostly used media. Lifetime: Hour
Material of Nozzle |
Steel Shot |
Quartz Sand |
Brown Alumina |
Alumina |
20-40 |
10-30 |
1-4 |
Tungsten Carbide |
500-800 |
300-400 |
20-40 |
Silicon Carbide |
600-1000 |
400-600 |
50-100 |
Boron Carbide |
2000-2500 |
1000-1500 |
500-1000 |
GENERAL NOZZLE CATALOGUE
£±£® Straight Bore Nozzle Inserts
SBNI-1
SBNI-2
2. Straight Bore Nozzles - 1" Thread¡¡SBN -1" Thread
£³£® Venturi Nozzles - 1" Thread¡¡VN-1"Thread
£´£® Venturi Nozzles - 2" Thread¡¡VN -2" Thread
 ¡¡ ¡¡
£µ£® Venturi Nozzles - 1-1/4" Thread¡¡VN-1 1/ 4" Thread
 ¡¡ ¡¡
£¶£® Nozzle Holders
NH-1
NH-2
 ¡¡¡¡
£·£® Lead-In Nozzle
LIN
 ¡¡
Lead-In nozzle can't be used independently.Instead, it must be used with nozzle holders.The lead-in nozzle bridges the large diameter difference between hose and nozzle. It leads theabrasive flow into the nozzle's orifice thus reducing friction loss. Therefore, the service life of sandblasting nozzle can be extended if it is used with lead-in nozzle.
£¸£®Other Nozzles
MN-1
MN-2
MN-3
 ¡¡¡¡
MN-4
MN-5
MN-6
MN-7
MN-8
Attention:
The drawings are our standar models. For their detailed sizes, please refer to the Download Area.
We are open to any kind of on-duty nozzling and non-standard parts with hot-pressed Boron Carbide(B4C) and Silicon Carbide(Sic) and Sintered Tungsten Carbide(TC).
|
